Maintenance and Precautions of Brake Pads

The brake pad will gradually wear out in use. When it is worn to the limit position, it must be replaced, otherwise, it will reduce the braking effect and even cause safety accidents.

 

 

Maintenance of ford mustang brake pads

 

Most cars adopt the front disc and rear drum brake structure. Generally, the front brake shoe is worn relatively quickly, and the rear brake pad is used for a relatively long time. In daily inspection and maintenance, we should pay attention to the following aspects:

 

• Under normal driving conditions, check the brake shoes every 5000km, not only check the remaining thickness but also check the wear state of the ford mustang brake pads, whether they wear degree on both sides is the same, whether they can return freely, etc. if abnormal conditions are found, they must be handled immediately.

 

• The brake pad is generally composed of an iron lining plate and friction material. Do not replace the shoe until the friction material is worn out.

 

• When replacing, replace the original parts, to achieve the best braking effect between the brake pad and the brake disc.

 

• When replacing the ford mustang brake pads, the brake wheel cylinder must be pushed back with a special tool. Do not press hard with other crowbars, otherwise, it is easy to bend the guide screw of the brake caliper and jam the brake pad.

 

• After replacing the brake pad, be sure to press the brake pedal several times to eliminate the gap between the shoe and the brake disc.

 

• After replacing the ford mustang brake pad, it needs to be run in for 200km to achieve the best braking effect.

 

Precautions for replacing kia sportage brake pads

 

The kia sportage brake pads are consumables and will gradually wear out in use. When they are worn to the limit position (the limit position can be determined by listening to the sound or looking at the thickness. Some cars will have alarm devices), they must be replaced, otherwise, the braking effect will be reduced and even safety accidents will occur.

 

It is recommended that the brake pad be replaced by a professional tool. It is not easy to pry back the brake pad when using the brake caliper to replace the kia sportage brake pads.

 

When replacing the brake pad, be sure to step on the brake a few more times to eliminate the gap between the brake pad and the brake disc. Just step on the brake pedal directly and there is pressure.

 

After replacing the kia sportage brake pads, the brake pad and brake disc have a certain running-in stage to achieve the best braking effect.

 

Summary

 

The brake pad is the most critical part of automobile braking. The braking effect is mostly reflected by the brake pad. Generally, the hydraulic transmission and the activities of the brake caliper are used to promote the friction between the brake pad and the brake disc, to achieve the function of deceleration braking. Once you feel that the brake is not working, first think about whether it is related to the kia sportage brake pad, so it is very important to master some automobile knowledge.

 

Make a purchase of kia rio brake pads from China, you can get them at a good price if you have a large quantity. We hope to be your long-term partner.